Dexon Canada Ventilation Equipment
V03-1 VENT FAN
- Outdoor Flange Mount -

Print this page

CONTROL PRINCIPALS:

AC fan will run continuous at full speed.

PLEASE BE AWARE: When using the VO3-1 120 VAC, NON IDLING VENT FAN - under certain climatic conditions, the potential exists for freezing and ice build-up in the discharge pipe of the ventilation system of a pump station. The amount of ice build-up may be sufficient to prevent the proper ventilation of the station. For this reason we highly recommend the use of the VO3 HAZLOC VENT FAN, running at a continuous idle speed, where climatic conditions do not necessitate the use of blower heater. The use of vent fans blowing continuous unheated air at FULL SPEED is not recommended in cold climate areas, and their use will be at the sole risk and responsibility of the owner.

ELECTRICAL REQUIREMENTS:

• 120 Volt, 60 Hz input Power
• 46 watts Maximum
• Fuse mounted remote (by others)

MECHANICAL REQUIREMENTS:

• Three 3/8 x 1½ inch stainless steel bolts and gaskets supplied for mounting on a 6 inch (150mm) standard flange